Products
Trapeze Plate
Usage Areas of Galvanized Trapeze Plates
» Construction of prefabricated structures,
» Roof and facade coatings,
» Hutch, silo and storage construction,
» For decoration purpose as wall and ceiling coating.
» Construction of prefabricated structures,
» Roof and facade coatings,
» Hutch, silo and storage construction,
» For decoration purpose as wall and ceiling coating.
27/200 Form
Technical Specifications
(Tolerance: +15 mm)
27/200 Form
Technical Specifications
Technical Specifications
- Plate thickness: min. 0,30 mm – max. 1,00 mm
- Plate length: min. 1000 mm – max. 13500 mm
- Plate beneficial area width: 800 mm
(Tolerance: +15 mm)
27/200 Form
Technical Specifications
- Plate Thickness: 0,30 mm – 1,00 mm
- Plate Length: min. 1000 mm – max. 13500 mm.
- Plate Beneficial Area Width: 1000 mm.
(Tolerance:+15 mm)
Purline Interval | Galvanized Sheet Thickness (mm) | ||||||||||
0,30 | 0,35 | 0,40 | 0,45 | 0,50 | 0,60 | 0,70 | 0,80 | 0,90 | 1,00 | ||
1,00 | 355 | 415 | 473 | 533 | 593 | 770 | 889 | 1009 | 1127 | 1187 | |
1,10 | 294 | 343 | 391 | 440 | 490 | 637 | 734 | 833 | 931 | 981 | |
1,20 | 246 | 288 | 329 | 370 | 411 | 536 | 617 | 701 | 782 | 824 | |
1,40 | 181 | 211 | 241 | 272 | 302 | 393 | 453 | 515 | 575 | 605 | |
1,50 | 158 | 185 | 211 | 237 | 264 | 343 | 396 | 449 | 501 | 528 | |
1,80 | 110 | 128 | 146 | 165 | 183 | 238 | 275 | 312 | 348 | 367 | |
2,00 | 89 | 104 | 119 | 134 | 149 | 193 | 223 | 252 | 282 | 297 | |
2,20 | 73 | 86 | 98 | 110 | 123 | 160 | 184 | 209 | 233 | 245 | |
2,40 | 62 | 72 | 82 | 93 | 103 | 134 | 155 | 175 | 196 | 206 | |
2,50 | 57 | 67 | 76 | 86 | 95 | 124 | 142 | 162 | 181 | 190 | |
2,80 | 45 | 53 | 61 | 68 | 76 | 98 | 114 | 129 | 144 | 152 | |
3,00 | 39 | 46 | 53 | 59 | 66 | 86 | 99 | 112 | 125 | 132 | |
Moment of Inertia (I:cm4) | 4,03 | 4,70 | 5,37 | 6,04 | 6,71 | 8,73 | 10,07 | 11,41 | 12,75 | 1343 | |
Moment of Resistance ( W:cm3) | 2,32 | 2,71 | 3,09 | 3,48 | 3,87 | 5,03 | 5,80 | 6,58 | 7,35 | 7,74 |