Products
4x4 Membrane Lining
4x4 Lining, which is produced appropriate to TS 113 standard, is a bituminous emulsion. It is applied by brush or roller on concrete in order to have a better adhesion of membrane for applications with ALPHA, BETA and GAMA series membranes.
| Test Name | Standard No | Unit | Result |
| Density | TS 132 | g/cm3 | 0,98 - 1,06 |
| Evaporation Residue | TS 132 | % | 45 - 55 |
| Ash Percentage of Residue | TS 132 | % | 05 - 20 |
| Water Amount | TS 132 | % | 45 - 55 |
| Flameproof | TS 132 | - | Nonflammable |
| Heating Test (100 °C) | TS 132 | - | Viscous |
| Flexibility (0 °C) | TS 132 | - | Non-cracking |
| Resistance Against Water | TS 132 | - | Incorruptable |
| Open Flame Affect | TS 132 | - | Not carbonized |
Applied as lining layer before application of water insulation membranes with polymer bitumen. Used as lining and binder for water insulations with fiberglass, bitumen felt and canvas. Used for insulation of foundation, basement, terrace and inclined roofs with water insulation coatings.
» Make sure that the surface is dry and free from chemical materials like oil, diesel oil, petrol etc.
» Keep the can closed after usage.
» Clean brushes with hot water after application.
» Thin with appropriate amount of water according to usage purpose and apply with brush.
Consuming Amount
400 gr for 1 m2 area.
Storage and Protection
Can be stored for 1 year with closed cover in +5 C - +30 C temperature interval.
» Keep the can closed after usage.
» Clean brushes with hot water after application.
» Thin with appropriate amount of water according to usage purpose and apply with brush.
Consuming Amount
400 gr for 1 m2 area.
Storage and Protection
Can be stored for 1 year with closed cover in +5 C - +30 C temperature interval.
